SMSL DO400 MK2 DAC, Headphone Amplifier & Preamplifier
The SMSL DO400 MK2 combines an ES9039MSPRO DAC, a fully balanced headphone amplifier and a preamplifier in one desktop component. Building on the original DO400 platform, the MK2 adds an internal 10MHz OCXO, SMSL's CK-04 clock-processing circuit, and updated power-supply and firmware designs.
Switch from focused headphone listening at your desk to playback through active speakers or a separate power amplifier. With USB, optical, coaxial, AES/EBU, I²S and Bluetooth inputs, the DO400 MK2 brings multiple digital sources together in one listening system.
ESS ES9039MSPRO DAC
The ESS ES9039MSPRO uses an eight-channel parallel conversion design and native hardware MQA processing. Its architecture is designed for low distortion and detailed, transparent digital-to-analog conversion.
Third-Generation XMOS XU316 USB Interface
A 16-core XMOS XU316 asynchronous USB receiver handles high-resolution playback up to PCM 768kHz and DSD512. Real-time parallel processing and clock recovery support demanding digital audio streams.
All wired digital inputs support DSD transmission. Coaxial, optical and AES/EBU inputs support DoP64; maximum format support varies by input and source configuration.
Built-In 10MHz OCXO and CK-04 Clock Processing
An internal 10MHz oven-controlled crystal oscillator is designed to reduce temperature-related clock drift. The independently developed CK-04 clock-processing circuit is tuned for the OCXO and re-clocks incoming audio signals to reduce timing errors during PCM and DSD playback.
Fully Balanced PLFC Headphone Amplifier
The fully balanced precision linear feedback circuit (PLFC) provides headphone amplification for a wide range of listening setups. Choose from 4-pin XLR, 4.4mm balanced and 6.35mm headphone outputs to match your headphone cable.
The supplied product information describes use with low-impedance planar and dynamic headphones as well as 300Ω and 600Ω models. Actual drive requirements vary with headphone sensitivity and listening level. Always reduce the volume before connecting headphones.
Six Digital Input Options
- USB
- Optical
- Coaxial
- AES/EBU
- I²S
- Bluetooth
RCA and XLR line outputs allow connection to compatible external audio equipment, while the three headphone connections offer flexibility for personal listening.
MQA and MQA-CD Support
The DO400 MK2 supports hardware MQA processing through USB, optical, coaxial and AES inputs, with up to 8× unfolding, as well as MQA-CD playback from a suitable source. For computer-based MQA playback, set the computer's system volume to maximum as recommended in the product instructions, and control listening level carefully at the audio system.
Qualcomm Bluetooth 5.4 with LDAC
Stream wirelessly from a compatible phone or tablet using Qualcomm Bluetooth 5.4. Supported codecs include LDAC up to 24-bit/96kHz, aptX HD, aptX, AAC and SBC. The codec and resolution used depend on the transmitting device and its settings.
Bluetooth pairing name: SMSL DO400MK2. The unit has a built-in fixed Bluetooth antenna.
Integrated Preamplifier Mode
Adjust output level directly from the DO400 MK2 when connecting to a compatible power amplifier or active speakers. Its integrated preamp function lets the same component serve as both digital source converter and volume-control hub.
Adjustable Sound and Playback Settings
Fine-tune operation with sound options and an ESS DPLL setting offering 15 adjustable levels. DPLL adjustment balances jitter rejection against tolerance of incoming signals, helping accommodate different digital sources.
Additional settings include audio phase, I²S mode, display brightness and FN key configuration. Interface languages include Chinese, English and Japanese.
User-Upgradable Firmware
Both system and USB firmware can be upgraded by the user. Follow the manufacturer's instructions and use firmware intended specifically for the DO400 MK2.
Technical Specifications
- Model: SMSL DO400 MK2
- Functions: DAC, headphone amplifier and preamplifier
- DAC Chip: ESS ES9039MSPRO
- DAC Architecture: Eight-channel parallel design
- USB Interface: Third-generation XMOS XU316, 16-core
- Maximum USB PCM Sampling Rate: 768kHz
- Maximum USB DSD Support: DSD512
- Clock: Internal 10MHz OCXO
- Clock-Processing Circuit: SMSL CK-04
- Headphone Amplification: Fully balanced PLFC
- Digital Inputs: USB, optical, coaxial, AES/EBU, I²S and Bluetooth
- Line Outputs: RCA and XLR
- Headphone Outputs: 4-pin XLR, 4.4mm and 6.35mm
- DoP Support: DoP64 through coaxial, optical and AES/EBU
- MQA Inputs: USB, optical, coaxial and AES
- MQA-CD: Supported
- Bluetooth Version: 5.4
- Bluetooth Codecs: LDAC, aptX HD, aptX, AAC and SBC
- LDAC Support: Up to 24-bit/96kHz with a compatible source
- DPLL Adjustment: 15 levels
- Firmware Updates: System and USB
- Interface Languages: Chinese, English and Japanese
- Remote Control: Included
What's in the Box
- SMSL DO400 MK2
- AC Power Cable
- USB Cable
- Remote Control
- User Manual
- SMSL Card
Setup Notes
Maximum supported formats depend on the selected input, playback software and source settings. Bluetooth does not support DSD transmission. Confirm I²S pin configuration compatibility with your source before use. Reduce volume before connecting headphones or switching to a different output.