FiiO DM11 Portable HiFi CD Player
The FiiO DM11 portable CD player brings your CD collection into a versatile modern listening setup. Combining a classic circular body with a CS43198 DAC, dual SGM8262 operational amplifiers, and 3.5mm single-ended and 4.4mm balanced headphone outputs, it offers dedicated HiFi playback in a compact design.
Enjoy CDs through wired headphones or compatible Bluetooth speakers, connect the DM11 to an external DAC through its digital outputs, or use it as a USB DAC with compatible devices. Direct CD-to-USB ripping adds a convenient way to save your favorite tracks in WAV format.
Classic Disc-Shaped Design
Inspired by traditional portable CD players, the DM11 features a patented structural design that integrates its drive mechanism, audio circuitry, and shock-absorption system into a body only slightly larger than a standard CD. At approximately 263.5g, it is easy to move between your desk, listening space, and travel setup.
CS43198 DAC and Dual SGM8262 Amplifiers
A high-performance CS43198 DAC works alongside two low-noise SGM8262 operational amplifiers to reproduce the detail and dynamics of your CD recordings. Both single-ended and balanced headphone connections are available to suit different listening setups.
Powerful Balanced Headphone Output
The 4.4mm balanced output delivers over 525mW + 525mW at 32Ω with THD+N below 1%, while the 3.5mm single-ended output provides over 140mW + 140mW under the same load and distortion conditions. Choose the connection that matches your headphones and preferred cable.
Optical and Coaxial Digital Connectivity
Use the DM11 as a compact digital transport through its shared 3.5mm optical/coaxial output. Connect it to compatible external DACs or audio systems to integrate CD playback into your existing setup. Native MQA digital output is also supported.
USB DAC Playback up to 96kHz/24-bit
The DM11 also functions as a USB DAC, supporting audio up to 96kHz/24-bit. Connect it to compatible computers, tablets, or smartphones to use its DAC and headphone outputs for digital music playback.
Bluetooth 5.4 Transmission
Listen through compatible Bluetooth headphones or speakers using Bluetooth 5.4 with SBC codec support. Bluetooth transmission is available for CD and USB audio playback, offering an alternative to wired listening.
Compatibility varies by receiving device. Some in-car Bluetooth systems and certain headphones or speakers may not be supported.
Direct CD-to-USB WAV Ripping
Capture tracks from audio CDs and save them directly to a compatible USB drive in lossless WAV format. The ripping function supports CDDA-format music and requires a FAT32-formatted storage device. A USB-C flash drive with a capacity of 32GB or less is recommended for ripping and firmware updates.
Rechargeable and Replaceable Batteries
Two custom 3.7V/1000mAh lithium batteries with protection boards provide rechargeable power with the flexibility of a replaceable design. Battery life is approximately four hours in CD playback mode and 6.5 hours in USB DAC mode. Charging takes approximately 1.5 hours.
Replacement batteries must match the required specifications. Actual runtime varies with volume, output selection, connected headphones, and operating conditions.
Dedicated CD Mechanism and ESP Protection
A customized CD mechanism supports stable disc reading, while a self-returning steel spindle helps make disc insertion and removal straightforward. ESP electronic anti-shock protection helps reduce interruptions caused by everyday movement during playback.
Technical Specifications
- Model: DM11
- Colors: Black, Blue, Orange
- DAC: CS43198
- Operational Amplifiers: SGM8262 × 2
- Display: Custom VA display
- Headphone Outputs: 3.5mm single-ended; 4.4mm balanced
- Digital Output: Shared 3.5mm optical/coaxial port
- Single-Ended Output Power: >140mW + 140mW, 32Ω, THD+N <1%
- Balanced Output Power: >525mW + 525mW, 32Ω, THD+N <1%
- USB DAC Resolution: Up to 96kHz/24-bit
- Bluetooth Version: 5.4
- Bluetooth Output Codec: SBC
- Supported CD-R Audio Formats: FLAC, WAV, WMA, MP3
- SACD Playback: CD layer only
- Signal-to-Noise Ratio: >122dB, A-weighted, CD mode, balanced output
- Single-Ended Noise Floor: <2μV, A-weighted, CD mode
- Balanced Noise Floor: <3.2μV, A-weighted, CD mode
- THD+N: <0.0018%, 1kHz / −1.4dB, 32Ω, CD mode, balanced output
- Battery Configuration: 2 × custom 3.7V/1000mAh lithium batteries
- Charging Input: USB-C, 5V/2A
- Charging Time: Approximately 1.5 hours
- CD Playback Battery Life: Approximately 4 hours
- USB DAC Battery Life: Approximately 6.5 hours
- Weight: Approximately 263.5g
What’s in the Box
- DM11 CD Player × 1
- USB-C to USB-C Cable × 1
- Quick Start Guide × 1
Please Note
The DM11 does not have a built-in speaker. Connect wired headphones, compatible Bluetooth headphones or speakers, or suitable external audio equipment. A power adapter is not included.
SACD playback is limited to the CD layer. The high-density SACD layer is not supported.
Only CDDA-format tracks can be ripped. USB storage must be formatted as FAT32; a USB-C drive of 32GB or less is recommended.
Disc-reading performance may vary with disc condition, media type, and recording quality. Some high-capacity recordable CDs may experience occasional skipping.