FiiO
Shipping to
Estimated delivery on
Canada, Mexico, Romania, United States: import duty of 10 USD
Couldn't load pickup availability
The FiiO JD1 GAMING combines 10mm LCP dynamic drivers, dedicated DSP audio decoding, and a detachable boom microphone in a lightweight wired in-ear headset. Built around the original JD1's dynamic-driver foundation and redesigned for gaming, it offers three EQ presets and a right-angle USB-C plug for a convenient transition between mobile gaming, music, and movies.
A lightweight, high-rigidity LCP diaphragm is paired with an asymmetric internal and external dual magnetic circuit. This design increases magnetic flux density around the voice coil to support driver control and transient response. Front and rear chamber pressure balancing helps the diaphragm move freely while supporting low-frequency extension and reducing pressure buildup.
From the impact of an in-game explosion to the rhythm of your favorite playlist, the JD1 GAMING is designed to bring a full-bodied dynamic-driver presentation to everyday entertainment.
The integrated DSP audio chip accepts digital audio through USB-C and supports decoding up to 384kHz/24-bit. Audio conversion takes place in the headset's dedicated electronics rather than relying on a device's analog headphone output, so no separate external DAC is required with a compatible USB-C audio source.
The high-sensitivity, wide-bandwidth microphone is designed to capture natural voice detail. Its flexible boom lets you position the pickup closer to your mouth for clearer communication during team play. Attach it for gaming or voice chat, then remove it for a simpler everyday listening setup. Removing the boom microphone disables the headset's microphone function.
Use the volume buttons to switch between the three presets. Gaming mode is an audio tuning preset, not a guarantee of improved gameplay performance.
The L-shaped USB-C plug routes the cable closer to your device instead of projecting straight outward. When holding a phone horizontally, this helps reduce interference with your grip and keeps the cable away from the main control area, while reducing bending and pulling stress at the connector.
At approximately 7g per earpiece without the cable, the JD1 GAMING is designed for extended listening without the bulk of an over-ear headset. Its triangular ergonomic shell uses balanced contact points for a secure fit, while the over-ear cable path follows the contours of the ear.
Textured zinc-alloy faceplates combine hydraulic forming and hand polishing, and aluminum-alloy sound nozzles add durability to the acoustic outlet.
The approximately 1.2m oxygen-free copper cable connects through 0.78mm 2-pin sockets for convenient replacement and compatible cable pairing. The included USB-C DSP cable provides the specified digital decoding and EQ functionality; using a different cable may change the available features and source requirements.
Designed for compatible iOS, Android, Windows, and macOS devices with USB-C digital audio support. Supported USB-C devices offer plug-and-play use without a separate audio adapter. This is not a direct Lightning connection; confirm your device's port and USB audio support before purchase. Available decoding formats and microphone behavior can vary by device and application.
| Model | FiiO JD1 GAMING |
|---|---|
| Wearing style | Over-ear, in-ear |
| Driver | 10mm LCP diaphragm dynamic driver |
| Audio decoding | Up to 384kHz/24-bit |
| Frequency response | 20Hz–40kHz |
| Driver impedance | 24Ω at 1kHz |
| Sensitivity | 109dB/mW at 1kHz |
| EQ presets | Music / Gaming / Cinema |
| Microphone | Detachable flexible boom microphone |
| Faceplate material | Zinc alloy |
| Sound nozzle material | Aluminum alloy |
| Cable conductors | OFC oxygen-free copper |
| Cable length | Approximately 120cm |
| Weight | Approximately 7g per earpiece, excluding cable |
| Earphone connector | 0.78mm 2-pin |
| Source connector | Right-angle USB-C |
| Supported systems | iOS, Android, Windows, macOS, with compatible USB-C digital audio support |
Specifications and feature descriptions are based on the supplied manufacturer information. Fit, perceived sound, and device compatibility depend on the user and connected equipment.





















A new tariff system will take effect across all 27 EU member states starting 1 July 2026. The EU is abolishing the duty exemption for low-value parcels — all goods entering the EU will now be subject to customs duties, including a fixed duty of €3 per HS tariff code category for IOSS-declared goods under €150.
A handling surcharge of USD $5 has been applied to all standard shipments to EU countries on orders under $100. Orders over 100 qualify for free expedited shipping.
We collaborate with the following courier companies:
In the event that a shipment is refused, undeliverable, or returned to sender, HiFiCat will process a refund to the original payment method. If a customer requests reshipment, a reshipment fee will apply. A restocking fee of up to 20% may also apply.
All taxes and duties are prepaid (DDP). 5–10 working days. Free standard shipping.
Tracking examples:
Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Cyprus
All taxes and duties are prepaid (DDP). 10–15 working days.
💰 Shipping cost: $5.00 USD (orders $0–$100) | Free (orders $500+, via DHL Express)
Tracking examples:
Norway, Switzerland, Ukraine, Armenia, North Macedonia, Moldova, Monaco, San Marino, Vatican City, Serbia, Albania, Kosovo, Montenegro, Bosnia & Herzegovina, Belarus, Georgia, Andorra, Guernsey, Jersey, Faroe Islands, Svalbard & Jan Mayen, Guadeloupe, Réunion, Gibraltar, Isle of Man, Mayotte, Iceland, Liechtenstein, Turkey
All taxes and duties are prepaid (DDP). 10–15 working days. Free standard shipping.
Main tracking portal: https://t.17track.net/
📧 Email: support@thehificat.com
📞 Tel: +8619270016096
